Spectrum and energy efficient digital modulation techniques for practical visible light communication systems

The growth in mobile data traffic is rapidly increasing in an unsustainable direction given the radio frequency (RF) spectrum limits. Visible light communication (VLC) offers a lucrative solution based on an alternative license-free frequency band that is safe to use and inexpensive to utilize. Improving the spectral and energy efficiency of intensity modulation and direct detection (IM/DD) systems is still an on-going challenge in VLC. The energy efficiency of inherently unipolar modulation techniques such as pulse-amplitude modulation discrete multitone modulation (PAM-DMT) and asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) degrades at high spectral efficiency. Two novel superposition modulation techniques are proposed in this thesis based on PAM-DMT and ACO-OFDM. In addition, a practical solution based on the computationally efficient augmented spectral efficiency discrete multi-tone (ASE-DMT) is proposed. The system performance of the proposed superposition modulation techniques offers significant electrical and optical power savings with up to 8 dB in the electrical signal-to-noise ratio (SNR) when compared with DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM). The theoretical bit error ratio (BER) performance bounds for all of the proposed modulation techniques are in agreement with the Monte-Carlo simulation results. The proposed superposition modulation techniques are promising candidates for spectrum and energy efficient IM/DD systems. Two experimental studies are presented for a VLC system based on DCO-OFDM with adaptive bit and energy loading. Micrometer-sized Gallium Nitride light emitting diode (m-LED) and light amplification by stimulated emission of radiation diode (LD) are used in these studies due to their high modulation bandwidth. Record data rates are achieved with a BER below the forward error correction (FEC) threshold at 7.91 Gb/s using the violet m-LED and at 15 Gb/s using the blue LD. These results highlight the potential of VLC systems in practical high speed communication solutions. An additional experimental study is demonstrated for the proposed superposition modulation techniques based on ASE-DMT. The experimentally achieved results confirm the theoretical and simulation based performance predictions of ASE-DMT. A significant gain of up to 17.33 dB in SNR is demonstrated at a low direct current (DC) bias. Finally, the perception that VLC systems cannot work under the presence of sunlight is addressed in this thesis. A complete framework is presented to evaluate the performance of VLC systems in the presence of solar irradiance at any given location and time. The effect of sunlight is investigated in terms of the degradations in SNR, data rate and BER. A reliable high speed communication system is achieved under the sunlight effect. An optical bandpass blue filter is shown to compensate for half of the reduced data rate in the presence of sunlight. This thesis demonstrates data rates above 1 Gb/s for a practical VLC link under strong solar illuminance measured at 50350 lux in clear weather conditions

A novel index modulation for dimming in LiFi systems

This paper introduces a novel dimming method for Light Fidelity (LiFi) based on index modulation (IM). A time-domain sample-index modulation (TIM) is proposed for indexed dimming (iDim). The aim is to maintain a high communication performance measured in signal to noise ratio (SNR) and a high transmission rate for a wide light emitting diode (LED) brightness range. Direct current optical orthogonal frequency division multiplexing (DCO-OFDM) is used. The system performance is experimentally validated by an implementation on a National Instruments (NI) PXIe-1085 and NI-7966R Field Programmable Gate Array (FPGA). The proposed iDim offers a wider dimming range and an improved SNR/symbol when compared to amplitude-modulation dimming (AM dimming). In particular, the iDim system provides a SNR/symbol of 22.5 dB for all brightness levels. The lowest optical power is measured at 20 \muW which is 10 times lower than the measured limit of AM dimming. This reduces the cost of the optical power per bit. Therefore, iDim is a promising dimming method for applications targeting extremely low illumination levels

Optical wireless communications for cyber-secure ubiquitous wireless networks

Wireless connectivity is no longer limited to facilitating communications between individuals, but is also required to support diverse and heterogeneous applications, services and infrastructures. Internet of things (IoT) systems will dominate future technologies, allowing any and all devices to create, share and process data. If artificial intelligence resembles the brain of IoT, then high-speed connectivity forms the nervous system that connects the devices. For IoT to safely operate autonomously, it requires highly secure and reliable wireless links. In this article, we shed light on the potential of optical wireless communications to provide high-speed secure and reliable ubiquitous access as an enabler for fifth generation and beyond wireless networks

15 Gb/s OFDM-based VLC Using Direct Modulation of 450 GaN Laser Diode

A record data rate for visible light communications (VLC) using a transistor outline (TO) packaged Gallium Nitride (GaN) laser diode is reported. Using a system 3 dB bandwidth of 1.4 GHz data transmission at 15 Gb/s is reported. This is achieved due to the use of orthogonal frequency division multiplexing (OFDM) in combination with a high system signal to noise ratio (SNR) and adaptive bit loading extending the effective bandwidth to 2.5 GHz. To the best of authors knowledge this is the highest reported data rate for single channel VLC